The CL-10 loudspeaker is a two way range loudspeaker which uses a coaxial aligned of two constant directivity horns. Two passively coupled drivers are used a 10″low frequency cone driver, and a 1″exit compression driver with 70° conical dispersion. Integrated suspensions points for use with optional mountion hardware and four rubber feet are fitted to the bottom of the cabinet from damage, a cup socket on the bottem. The enclosure is constructed with 15mm plywood, screwed and glued together for maximum strength and rigidity, and includes a reticulated foam and steel mesh grille. It is finished in black textured paint. A rear panel connector plate carries two Neutrik Speakon NL4MP for connection to CL-15SUB for perfect application

Key Feature:

*Elegent symmetrical shape
*Coaxial technology
*One cup socket on the bottom
*compact enclosure
*Integrated suspension hardware provided

Application:

  1>. For small occasion sound reinforcement
  2>. Club, Par and recreation room
  3>. Corporated center
  4>. TV shows
  5>. Meeting rooms
  6>. Live sound speech

Specification:

* Frequency Response (±3 dB): 80 Hz - 20 kHz
* Sensitivity (1w/1m): 95 dB
* Long-term SPL: 113dB
* Maximum SPL: 116 dB
* Nominal Impedance: 8ohm
* Power rated: 175 watts
* Peak Power handling: 350 watts
* Nominal Dispersion: 70” conical
* Dimensions (H x W x D): 295 mm x 390 mm x 355 mm
* Enclosure Material: 15mm plywood
* Surface Finished: black catalyzed polyurethane paint
* Grille: 1.0mm black perforated steel framed with a reticulated foam
* Net weight: 17kg
* Low Frequency Driver: 1×10”, 2.0” voice coil
* High Frequency Driver: 1” polymer diaphragm
* Input Connectors: pushing terminals